介紹了基于AT89S52 的激光雷達方艙溫濕控制系統的工作原理，并著重討論系統硬件
和軟件的實現方法。系統采用AT89S52 單片機為核心，配置以溫度傳感器、濕度傳感器和A/D 轉換器等部件，實現了對激光雷達方艙內溫度和濕度的實時調控。
關鍵字:單片機; 溫度傳感器；濕度傳感器；A/D 轉換器；激光雷達方艙;環境控制
Abstract: The principles and methods of a controlling system based on AT89S52 applied for the lidar house are introduced in this paper and described the realizing approaches of both the
hardware and soft ware in particularly. The AT89S52 single chip microcomputer is used as the
kernel component of this system and the other parts are temperature sensor、analog-digital
converter and humidity sensor, which enable a more precisely and reasonable management
towards temperature and humidity in the lidar house.
Keywords: Single-chip microcomputer; temperature sensor; humidity sensor; analog-digital
converter; Lidar house; Environmental control